SEPARATE OIL AND GAS EQUIPMENT
Corrosion-proof centrifugal pumps of various types and designs with the flow rate of up to 10000 m3/h and operating pressure of up to 220 bar
Corrosion proof centrifugal pumps of
- various designs
- capacity up to 10000 m3/ h
- operating pressure: up to 220 bar
We can offer different types of centrifugal pumps depending on medium, operation conditions and required technical parameters. Pumps are designed for oil refineries, petrochemical & gas processing units.
One-stage centrifugal pumps
Average-power processing pumps in accordance with API-610
Operating parameters: |
Capacity (m3/h) | : up to 2 300 |
Head (m) | : up to 360 |
Ðressure (bar) | : up to 55 |
Temperature, °Ñ | : up to +450 |
Horizontal single-stage high efficiency centrifugal pump with radially split casing according to API 610 |
Horizontal single-stage high efficiency double-flow process pump with bearings on both sides according to API 610 |
|
|
Design features
Double-flow impeller
Bearings on both sides
Radially split casing with centerline support |
Design features
Centerline support
"Back-pull-out" configuration
Available with inducer |
Available materials:
- carbon steel
- stainless steel
- duplex steel and alloy
Multi-stage horizontal high pressure pumps (API 610)
Operating parameters: |
Capacity (m3/h) | : up to 700 |
Head (m) | : up to 4200 |
Ðressure (bar) | : up to 400 |
Temperature, °Ñ | : up to +420 |
Horizontal multi-stage high pressure pump in barrel design – with back-to-back rotor – according to API 610 |
Horizontal multi-stage high pressure pump in back-to-back design |
|
|
Mechanical features
- barrel design in pull-out configuration
- back-to-back position of impellers provides min. axial forces and very smooth running
- 1st stage impeller always as NPSH impeller
- anti-friction or friction bearings
- centerline support
|
Mechanical features
- multistage high pressure pump, radially split
- back-to-back rotor
- 1st stage is always complete with NPSH impeller
- anti-friction or friction bearings
- centerline support
|
Available materials:
- steel casting
- chromium-nickel steel
- duplex steel and alloy
- special-property alloys
Multi-stage vertical high pressure pumps (to API 610)
Vertical barrel pumps in accordance with API 610
Application area:
- crude oil
- booster pumps and transfer pumps
- liquefied gases
Operating parameters: |
Capacity (m3/h) | : 3000 | 550 |
Head (m) | : 360 | 1400 |
Ðressure (bar) | : 63 | 140 |
Òemperature, °Ñ | : +100 | -180/+260 |
Design features
- vertical barrel casing, compensation of axial thrust by means of balancing piston
- anti-friction bearings or combined axle-radial friction bearings
- NPSH impeller in single-flow or double flow versions
|
Vertical multi-stage semi-submersible high pressure pumps according to API 610 and ÀÒÅÕ
Application area
- Oil refining plants
- crude oil pumping via booster and transfer pumps
- blended fuel
Operating parameters: |
Capacity (m3/h) | : 600 |
Head (m) | : 600 |
Ðressure (bar) | : 63 |
Òemperature, °Ñ | : +180 |
Construction features
- vertical, multi-stage, centrifugal pump with radial impeller, with NPSH overhung impeller depending on construction length
- compensation of axial thrust via balancing piston
- journal bearings lubricated in pumps by pumped liquid
Materials
- ductile iron
- steel cast
- high-alloy stainless steel
- duplex steel
|
Available materials:
- cast steel
- chromium steel
- duplex steel
Rotary vane type pump for heavy oil products of high viscosity
The offered vane type pump is specially designed for asphalt/tar, but can be applied for other media. It is of modular construction with high-power rotating parts. There are no separating gears, but only two single mechanical seals even for high-temperature applications (over 260 °Ñ). Besides it is a short and a compact pump, therefore it is easy to keep it hot.
The functioning principle of the pump is that the eccentricity between the shaft and the rotor forms chambers between the rotor and the vanes the size of which changes as the pump rotates. The liquid which flows into the pump is transacted to the rotor ends and backwards through the delivery orifice.
Operating parameters: |
Capacity | : 0-265 m3/h (higher upon request) |
Medium temperature | : -30…+260 °Ñ |
Operating pressure | : 14 bar (50 bar upon request) |
Medium viscosity | : 2…75000 cSt |
Besides asphalt and tar, the pumps are applied for other viscous media transfer:
- lube oils and additives
- oil products
- lubricating grease
- polymers and polyols
- resins, varnishes, glues
The offered positive displacement vane-type pump has such mechanical features which ensure its long life. Low speed provides torque without cavitation effect so that pumped medium suffers no influence resulting in loss of properties. If any parts will have still to be replaced, the simple and reliable construction allows its users to perform the replacement easily on their own.
|